Description
Grips for Graflex based sabers
ANH options:
- Set of 7 uncut classic T-tracks, 100mm length, without adhesive tape
- Set of 7 pre-cut classic T-tracks, with correct 30° angles, 92mm length, with adhesive tape backing
- Set of 7 EZ-grips™ with correct 30° angles, with adhesive tape backing
ESB options:
- Set of 6 uncut classic T-tracks, 100mm length, without adhesive tape
- Set of 6 pre-cut classic T-tracks, notched and drilled, 92mm length, with adhesive tape backing
- Set of 6 EZ-grips™ with notches and holes, with adhesive tape backing
TFA/TLJ options:
- Set of 6 cast resin grips, 90mm length
Classic T-tracks
The uncut classic T-tracks are extruded in PVC like the original prop and allow for the length and angles cut to be non-uniform for a more accurate finish. They have a typical surface texture of the extrusion process (with machine lines in the length). The T-profile was used in multiple props throughout the SW universe.
WannaWanga EZ-grips™
Very accurate ready-to-use grips for Graflex & MPP based sabers. EZ-grips™ are injection molded in ABS. They are symmetrical and idealized. They have a fine textured surface finish.
- Easy to install (with self-adhesive 3M tape on the back)
- Perfectly detailed, no work or finishing needed
- High impact ABS material
- Symmetrical and precise T-profile
TFA/TLJ resin grips
The resin TFA/TLJ grips for Rey’s hero TFA/TLJ Graflex saber are based directly on the original hero prop. The notches and rivet holes are cast in the parts. The bottom is curved to fit a Graflex tube or Graflex replica.
